Basic knowledge of three section hidden bottom slide

As the carrier between the cabinet and the drawer, the slide rail is an indispensable part of the home hardware accessories and plays a pivotal role. After a long period of development and precipitation, the slide industry has gradually formed four more distinctive products:

First generation slide: Powder slide

Second generation slide rail: steel ball slide rail

Third generation slide rail: hidden slide rail

Fourth generation slide rail: horse drawn slide rail

In the past two years, the hidden slide with its good stability and smoothness has gradually been favored by the majority of consumers, but because more of the use of powder slide and steel ball slide for a long time, so whether it is the installation master or the end use owners do not know much about the hidden slide, the following Olidon detailed explanation of the basic knowledge of the hidden bottom slide, hope to help you.

Hidden slide rail is mainly divided into eight categories, I believe that after you understand, you can choose a suitable for your own bottom rail.

First distinguish by length: reduced size and full size.

The reduced size means that the length of the drawer is reduced by 10mm from the standard slide. For example, for a 400mm length slide, the drawer size needs to be 390mm.

The second is divided according to the function: the handle can be reconciled.

Third according to the hole type: oval and round.

The oval hole has more adjustment and error correction ability when it is installed.

Fourth, according to the tension points: heavy tension and light tension.

This need to choose the appropriate tension according to the specific use, the greater the tension, the greater the strength required to open the drawer.

The fifth is divided into two sections and three sections according to the structure.

The two-section slide drawer can only open 80%, and the three-section slide drawer can be pulled out completely, making it more convenient to take things.

Sixth, press the handle: one and three dimensional adjustment.

The one-dimensional handle can only be adjusted up and down, and the three-dimensional handle can be adjusted up and down, left and right, front and back in three directions.

Seventh according to the side plates: 18 plates and 16 plates.

Different plate thicknesses need to choose the corresponding hidden slide, and pay attention to this when purchasing, because this will be related to the drawer cutting size.

Eighth according to the customer: bathroom cabinet and clothing cabinet.

The bathroom cabinet because the drawer is generally relatively short, so the two sections are more, and the three sections of the clothing cabinet are more.